English EN
TürkçeTREspañolESРусскийRUالعربيةAR

TS-L80 Thermoforming Machine The ideal partner for a sustainable solution

TS-L80 Thermoforming Machine
Name
:
TS-L80 Thermoforming Machine
Max. Mould Dimensions
:
800 x 580 mm
Max. Forming Depth
:
140 mm
Tool Compatibility
:
RDK 80
Cycle Speed Max. (Dry Cycle)
:
75 cycles/min
Max. Sheet Width
:
840 mm
Max. Sheet Thickness (PET, CPET, PP, PVC, PS, OPS, PLA)
:
1.5 mm
Air Pressure
:
6 bar
Vacuum Pump
:
100 m³/h
Power Consumption
:
25 – 40 kW
Total Installed Power
:
130 – 135 kW
Control Unit
:
B&R Industrial PC
Screen
:
B&R Colourful, 18.5” Touch Screen
Central Lubrication
:
BEKA-MAX - PC Controlled
Software
:
INPAK
Maximum Mould Dimensions
800 mm x 580 mm
Minimum Mould Dimensions
360 mm x 400 mm
TS-L80 Thermoforming Machine
Get Offer Digital Catalog
Unwinder
Chains and Rails
Heaters
Forming Station
Hole Punching Station
Cutting Station
Stacker Unit
Scrap Winder
Electrical Unit
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Termoform Bobin Açma

Unwinder

  • Roll lifting system – Hydraulic (Optional)
  • Able to work with double roll
  • Analog controlled, non-stop roll opener
  • Max. roll diameter: 1200 mm
  • Pre-heating system with hot air circulation, 15 m storage (Optional)
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Chains and Rails - Zincir ve Raylar

Chains and Rails

  • Sheet transport via the bottom side of the chain rail
  • Servo-driven chain pulling system with high precision
  • Sheet edge heaters (Quartz) before both rails
  • JWIS chains on water-cooled 6082 aluminium profile chain rails
  • Motorised rail distance adjustment from 4 points with rotary encoder for measurement
  • 5th rail adjustment motor before the cutting station – for TS-L80/4 only (Optional)
  • Automatic sheet stretching system adjustable on the screen (especially for PP sheet)
  • Automatic chain lubrication – PC controlled (BEKA-MAX)
  • Photocell for pre-printed sheet (Optional)
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Heaters - Isıtıcılar

Heaters

  • Elstein ceramic top and bottom heaters in AISI-304 stainless steel trays, individually adjustable line by line
  • Standard: 12 heating lines – 2 x 50 = 100 kW
  • Black ceramic heaters – 12 lines (Optional)
  • Infrared temperature measurement on sheet surface
  • Sensor control against sheet sagging
  • Heater tray dimensions: L 1760 mm x W 860 mm
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Forming Station - Şekil Verme İstasyonu

Forming Station

  • Compatible with RDK 80 forming tools
  • 4 column – servo motor driven, clamping force: 800 kN
  • Max. mould size: 800 x 580 mm
  • Max. forming depth: 140 mm
  • Individual motion, max. stroke (lower/upper): 150 mm / 150 mm
  • Pneumatic clamp frame system with precise, fine stroke adjustment on top and bottom
  • Servo-driven plug assist on top former (Optional)
  • Servo-driven plug assist on bottom former (Optional)
  • Forming by air pressure and/or vacuum
  • Quick mould fixture system with electrical switches
  • Fully automatic mould height adjustment on top former
  • Pneumatic weight balancing system
  • Long-life, special needle bearings, gapless joints
  • Flow control sensor for cooling water
  • System for taking up the play of the adjustment bolts
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Hole Punching station

Hole Punching Station

  • Optional station – for TS-L80/4 only
  • Compatible with RDK 80 punching tools
  • Servo motor driven, clamping force: 500 kN
  • Individual motion, max. stroke (lower/upper): 150 mm / 150 mm
  • Motorised precision vertical adjustment on top body
  • Motorised position adjustment of station with rotary encoder
  • Pneumatic weight balancing system
  • Long-life, special needle bearings, gapless joints
  • Vacuum device for hole punching scraps (Optional)
  • System for taking up the play of the adjustment bolts
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Cutting Station - Kesim İstasyonu

Cutting Station

  • Compatible with RDK 80 cutting tools
  • Servo motor driven, clamping force: 600 kN
  • Individual motion, max. stroke (lower/upper): 150 mm / 150 mm
  • Lower cutting table adjustable from 24 to 140 mm
  • Motorised precision cutting adjustment on top body by 0.03 mm/pulse
  • Precision cutting adjustment by 0.01 mm/pulse (Optional)
  • Cutting knife heating (max. 150 °C) and cooling plate
  • Motorised X-Y tool adjustment system with rotary encoder
  • Motorised position adjustment of station with rotary encoder
  • Quick tool fixture system with electrical switches
  • Pneumatic weight balancing system
  • Long-life, special needle bearings, gapless joints
  • System for taking up the play of the adjustment bolts (very important for long knife life)
Sweeper
Servodriven A-B Stacker & Sweeper
Robot Stacker
Lid Robot Stacker
Down Stacker
RDK 80 Type Stacker
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Stacker Unit

Sweeper Sweeping the stacked and counted products from the stacker upper frame walls towards the conveyor. Supplied with pneumatic A-B stacking system.

INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Servodriven A-B Stacker & Sweeper

Servodriven A-B Stacker & Sweeper Alternative of the robot stacker for A-B or A-B-C stacking. It enables A-B stacking inside the upstacker frame walls. “A” product line goes under “B” line with a servo motor driven mechanism. Another servomotor drives the counted stacked products on to the conveyor. A-B or A-B-C stacking is possible with actual forming speeds.

INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Robot Stacker

Robot Stacker Robot stacker is the most flexible option which provides several working modes. This is a good option for A-B stacking, also good for short or small products which are difficult to hold in conventional stacker upper frame walls. Classic working modes:

  • Classic sweeper mode
  • Classic A-B stacking mode (A-B within upstacker frame walls)

Robot working modes:

  • Pick and place
  • 180° A-B stacking
  • 90° A-B stacking
  • 2-step A-B stacking
  • A-B-C stacking
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Lid Robot Stacker

Lid Robot Stacker (with Servodriven Upper and Lower Frame) Lid robot stacker is useful when most of the products dedicated to the machine have round cutting geometries. The system enables higher stacks. It is also possible to reduce sheet scrap ratios with “W” cavity placements. Working modes:

  • Classic sweeper mode
  • Classic A-B stacking mode (A-B within upstacker frame walls)
  • Round shaped product stacking with lid robot system
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Down Stacker

Down Stacker Down stacker is an additional feature to standard upward stacking. It is useful while stacking large and thin products such as fruit liner trays, which are not easy to hold in upstacker frame walls.

INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Stacker Unit

RDK 80 Type Stacker As an alternative to the Inpak standard stacker units, an RDK 80 type stacker unit is available so that your existing RDK 80 stacker tools can be used. Configurations (Optional):

  • RDK 80 type stacker unit
  • RDK 80 type stacker unit with down stacker
  • RDK 80 type stacker unit with robot stacker
  • RDK 80 type stacker unit with robot stacker + side servo A-B
  • RDK 80 type stacker unit with robot stacker and down stacker
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Scrap Winder

Scrap Winder

  • Asynchronous winder motor with electronic torque control
  • Pneumatic discharging system of scrap
INPAK Makine - Termoform Makine Üreticisi - INPAK Machine - Thermoforming Machine Manufacturer - Electrical Unit - Elektrik Kabini

Electrical Unit

  • Electrical cabinet and installation according to CE norms
  • High quality electrical and electronic components (B&R, SEW, SIEMENS, MOELLER, OMRON, SCHNEIDER)
  • Air-conditioner for cabinet
TS-L80 Thermoforming Machine

Longer Lifetimes

TS-L80 Thermoforming Machine

Highest Cycle Speeds

TS-L80 Thermoforming Machine

Less Energy Consumption

TS-L80 Thermoforming Machine

Ease of Use

TS-L80 Thermoforming Machine

Increased Availability

TS-L80 Thermoforming Machine

The TS-L80 Thermoforming Machine is a high-speed, servo-driven thermoforming machine with an 800 x 580 mm mould area. Developed for manufacturers working with RDK 80 tools, the TS-L80 lets you keep using your existing moulds while gaining the efficiency and reliability of INPAK.

Key Technical Features

  • Max. mould dimensions: 800 x 580 mm
  • Max. forming depth: 140 mm
  • Tool compatibility: RDK 80
  • Max. speed: 75 cycles/min (dry cycle)
  • Forming station: 4 column, servo motor driven, 800 kN clamping force
  • Cutting station: servo motor driven, 600 kN clamping force
  • Sheet: PET, CPET, PP, PVC, PS, OPS and PLA; max. 1.5 mm
  • Control: B&R industrial PC with 18.5” touch screen

RDK 80 Tool Compatibility

The TS-L80 is compatible with RDK 80 tools in the forming, hole punching and cutting stations, and with the optional RDK 80 type stacker unit your existing stacker tools can be used as well. This lets you protect your tooling investment while moving your production to INPAK technology.

Configuration and Options

The machine is available as TS-L80/3 with forming, cutting and standard stacker stations, or as TS-L80/4 in a 4-station frame that can take an optional hole punching station. Options such as hydraulic roll lifting, pre-heating system, black ceramic heaters, servo-driven plug assist, robot stackers and low-level handling conveyors let you configure it to your needs.

Applications

Ideal for high-volume production of PET, PP and PS products such as food containers, hinged containers, trays, cup lids and industrial packaging.

Why INPAK?

Since 2006, INPAK has been a trusted partner in thermoforming technology with more than 500 machines on six continents. Contact us for technical details and a quotation for the TS-L80.

Read More
Show Less